The Sanicubic 2 Classic contains two separate, load balanced pumps with high performance macerating systems and will operate alternately. In the event of inflow overload, both motors run at the same time, or in the unlikely event that one motor fails, the other one will take over.

  • Takes waste from WC’s, basin, bath, shower, bidet, washing machine, dishwasher and sink. 
  • Tough, reliable macerator ideal for busy business environments and larger domestic situations
  • New design with easily removable motor for servicing and maintenance
  • Pumps up to 11m vertically or 110m horizontally 

The Sanicubic 2 Classic is a tough, reliable macerator pump which contains two separate load balanced macerator systems which operate alternately ensuring even wear of motors. It is ideal for busy business and large domestic situations. The unit can handle waste water from WC’s, a basin, sink, washing machine, dishwasher, shower, bath, and bidet. The Sanicubic 2’s new design means the motors are easily removable for servicing and maintenance as is the water level indicator. It has two alarms for ultimate safety both are hard-wired alarms. The Sanicubic 2 Classic has four inlets, the centre height of the inlets is 140mm and it discharges through 50 mm pipework. It has a working temperature of 35ºC, however it will handle temperatures up to 75ºC for short periods. The Sanicubic 2 has a tank capacity of 45 litres and a flow rate 13m³/h. It can be connected to a Building Management System. The Sanicubic 2 Classic comes with a 2 year warranty. 

Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanicubic 2 offers you peace of mind and with the back up from our service team there’s never been a better time to install a Saniflo.

SANICUBIC 2 Classic datasheet

32,9 kg
Number of available inlets
Inlet diameter
• 1 inlet DN 40/50 (Ø ext. 40/50 mm) • 4 inlets DN 40/50/100/110 (Ø ext. 40/50/100/110 mm)
Motor power
2 x 1500 W
Supply voltage
Electrical class
IP rating
Maximum incoming water temperature
70 °C intermittently (max 5 min)
Discharge pipe diameter
DN40 (Ø ext. 50 mm)
Control box IP rating
Weight (including accessories)
35 kg
Maximum recommended depth
11 m
Tank volume
45 L
Vent diameter
50 mm
Maximum depth (Q eq 0 L/min)
13 m
ON/OFF level
140/60 mm
Alarm level
210 mm
Possible connections
Connection options: blackwater from several toilets, greywater from bathroom, kitchen, laundry

Complementary products

Carbon Air Filter

Carbon Air Filter

For use with waste water and sewage pumping systems where a vent to the...